Bedienungsanleitung Scheppach HS116 (Seite 36 von 72) (Deutsch, Englisch, Französisch)

782563

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

36 | GB

Implement measures to protect against noise nui-

sance.

In doing so, take into account the complete working

process, including the times when the power tool is

working without load or switched o󰀨.

Suitable measures include regular maintenance and

care of the power tool and the insertion tools, regu-

lar breaks as well as proper planning of the working

process.

It is necessary to dene safety measures to protect

the operator which are based on an estimate of vibra-

tion exposure during the actual operating conditions

(for this, all parts of the operating cycle have to be

considered, e.g. times during which the power tool is

switched o󰀨 and times during which it is switched on

but runs in no-load mode).

8. Unpacking

m DANGER

Danger of choking or su󰀨ocating

The packaging material, packaging and transport

safety devices are not children’s toys. Plastic bags,

foils and small parts can be swallowed and lead to

choking.

- Keep packaging material, packaging and trans-

port safety devices away from children.

• Open the packaging and carefully remove the prod-

uct.

• Remove the packaging material, packaging and

transport safety devices (if applicable).

• Check the completeness of the scope of delivery. The

customer service must be notied immediately of any

complaints. Later claims will not be recognised.

• Check the scope of delivery for transport damage.

The transport company must be notied immedi-

ately of any complaints. Later claims will not be

recognised.

• Keep the packaging until the end of the warranty

period.

• Read through the operating manual completely.

• Only use original spare parts or accessories. Orig-

inal spare parts or accessories can be obtained

from your dealer.

• Check that the data on the type plate matches with

the mains power data.

9. Assembly

m WARNING: Remove the mains plug before main-

taining, modifying or assembling the circular table saw.

m Attention!

Always make sure the device is fully assembled

before commissioning!

7. Technical data

AC motor 220 - 240 V~

Power consumption 2000 W

Operating mode S1

Idle speed 4500 min1

Carbide saw blade 255 x 30 x 2,8 mm

Thickness of saw blade

disc 1,8 mm

Number of teeth (pre-

mounted saw blade) 24

Riving knife thickness 1,8 mm

Min. size of workpiece

W x L x H 10 x 50 x 1 mm

Min. table size 742 x 640 mm

Max. table size 1195 x 640 mm

Cutting height max. 45° 58 mm

Cutting height max. 0° 83 mm

Tilting saw blade 0 - 45°

Extraction connection Ø 35 mm

Weight approx. 29 kg

Technical changes reserved!

*S1:Continuous operation with constant load

Noise

The noise values have been determined in accord-

ance with EN 62841.

Sound pressure level LpA .............................. 94 dB(A)

Uncertainty KpA .................................................... 3 dB

Sound power level LWA .................................107 dB(A)

Uncertainty KWA ................................................... 3 dB

m WARNING

Excessive and frequent exposure to noise can lead to

hearing damage or hearing loss.

- Wear hearing protection.

- Take breaks.

Total vibration values (vector sum of three directions)

determined according to EN 62841.

NOTE: The specied noise emission values have

been measured in accordance with a standardised

test procedure and can be used to compare one power

tool with another.

The specied noise emission values can also be

used for an initial estimation of the exposure.

WARNING: The noise emission values can vary

from the specied values during the actual use

of the power tool, depending on the type and the

manner in which the power tool is used, and in

particular the type of workpiece being processed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HS116 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info