Bedienungsanleitung Visonic Powermaster-360 (Seite 24 von 96) (Englisch)

769323

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

24 D-307500 PowerMaster 360 Installer's Guide

No.

Zone Type

Description

wired smoke detector.

17.

Guard keybox

A Guard keybox zone is usually connected to a metal safe containing the physical keys

needed to enter the building. Following an alarm, the safe becomes available to a trusted

Guard who can open the Guard keybox, obtain the keys and enter the secured premises. The

Guard keybox zone acts just like a 24H audible zone. The Guard keybox zone also provides

automatic audible internal and external siren alarm that is immediately reported to the

Monitoring Station (and does not depend on the Abort Time).

Notes:

1. Opening/closing the Guard keybox causes the PowerMaster-360 to signal the Monitoring

Station.

2. Operates with the magnetic contact device with auxiliary input.

Outdoor

A zone for outdoor areas where an activated alarm does not indicate intrusion into the house.

This zone generates and alarm when the system is armed both in AWAY and HOME modes.

Events are sent to private phones and not to the monitoring station.

Int./Delay

This zone type behaves as an Interior zone when the system is armed HOME and as

Delayed zone when the system is armed AWAY.

Tamper

This is a 24 hour zone operating all of the time even when the system is disarmed. The

tamper zone reports tamper alarm events from an external wired device.

Line Fail

This zone type is active 24 hours, even when the system is disarmed. It is used to report

phone line fail troubles from an external wired receiver, connected to a phone line.

PSU Fail

This zone type is active 24 hours, even when the system is disarmed. It is used to report

power supply fail troubles from an external wire device.

Panic

This zone type is active 24 hours, even when the system is disarmed. It is used to report

panic events from panic devices to the monitoring station or private telephone numbers. A

panic event generates an audible siren alarm.

Freezer Trbl

This is a 24 hour zone that operates all of the time, even when the system is disarmed. The

freezer trouble zone reports a trouble from an external (3rd party) temperature device if it

detects a change in temperature. Freezer trouble beeps can also be produced by the siren if

enabled. This zone type is often used with refrigerators with an external output temperature

detector. If the temperature inside the refrigerator is above a defined value the refrigerator

can trigger the output connected to the freezer trouble zone type and the PowerMaster panel

will trigger a freezer trouble alert.

(∗)

These Zone types are useful mainly when you arm and disarm the system from inside the protected premises. If

you arm and disarm the system from outside (without tripping any sensor), such as using a keyfob, it is

preferred to use the other Zone Types.

4.4.3 Deleting a device

Step 1



Step 2



Step 3



Step 4



Step 5

Select "DELETE

DEVICES" Option

[1]

Select the respective

device Group

[2]

Select exact device

you require to

delete

[3]

To delete the device:

press the key

[4]



02:ZONES DEVICES

CONTACT SENSORS



DELETE DEVICES

MOTION SENSORS

Z01:Motion Sens

ID No. 120-1254

<OFF> to delete

 to

step 2



– Deleting a Device

[1]

Enter the Installer Mode Menu, select the 02.ZONES/DEVICES option (see section 4.2) and then select the

DELETE DEVICES option.

[2]

Select the respective group of the device you require to delete. For example, MOTION SENSORS.

[3]

Scroll the Device Group, identify (by zone and/or ID number) the exact device you require to replace, for

example: Z01: Motion Sensor > ID No. 120-1254 and press the button.

[4]

The display prompts you <OFF> to delete. To delete the device, press the (OFF) button.

4.4.4 Modifying or reviewing a device

To Modify or Review the device parameters proceed as follows:

Step 1



Step 2



Step 3



Step 4



Step 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Visonic Powermaster-360 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info